Home › Backline Hire › Bass Amp Heads
Bass Amp Heads
Ampeg SVT III Pro Bass Head |
RatesPer Day£45.00 Per Week£180.00 |
|
Pro Series heads feature single or multi-tube preamps, five position mid frequency selection, and Neutrik Speak-On® connectors that lock and provide better conductivity. A Mute button lets you change instruments in the middle of a set without the annoying 'pop,' and a Tuner Out jack that stays active even with Mute button on
|
||
Ampeg SVT II 300 Watt Bass Head |
RatesPer Day£45.00 Per Week£180.00 |
|
This Valve amplifier is 300 Watts RMS and is switchable between 2 and 4 Ohms On the front:
On the Back:
|
![]() |
|
Ampeg SVT Classic Bass Head |
RatesPer Day£45.00 Per Week£180.00 |
|
This Valve amplifier is 300 Watts RMS and is switchable between 2 and 4 Ohms On the front:
On the Back:
|
![]() |
|
Ashdown Mag 300 (Bass Head) |
RatesPer Day£30.00 Per Week£120.00 |
|
The MAG 300H head features a potent new fan-cooled 307 watts RMS power section. Rotary bass, middle and treble controls are supplemented by smaller rotary controls providing 15dB of cut and boost at 220Hz and 1.6kHz, providing a comprehensive 5 band EQ section. Additionally, front panel push switches for Bright and Deep settings provide instant access to attacking and warm, rounded sounds respectively and, on the subject of low-end response, the trademark Ashdown sub-harmonic generator is ready and able to deliver truck loads of earth moving tone if called upon. Inputs are provided for active and passive instruments and the front panel also features an effects send and return, a tuner/line output and a balanced DI output for direct connection to a mixing console. |
||
Crate BX200 Bass Head |
RatesPer Day£10.00 Per Week£50.00 |
|
200 Watt bass head with 7 Band Graphic Eq.
|
||
David Eden WT 800 |
RatesPer Day£50.00 Per Week£200.00 |
|
The WT-800 World Tour is the number one choice of touring endorsees. With a tube hybrid stereo amplifier which is conservatively rated at 400 watts per sides into 4Ohms (800W bridged into 8Ohms) with a minimum of 3dB of headroom, the WT800 is the perfect choice for the touring professional. Standard features include: switchable automatic compression, five-way semi-parametric tone control and electronic crossover, pre and post effect loops, stereo aux inputs, DI out with ground lift, headphone out, tuner out, and a thermostatically controlled fan.
|
||
Fender Bassman 100 Bass Head |
RatesPer Day£50.00 Per Week£200.00 |
|
Vintage 100 Watt Fender Bassman Head manufactured between 1972 and 1976. 2 Channels with 2 inputs per channel. Ideal for bass and guitar. Bass Channel :
Normal Channel :
|
![]() |
|
Gallien Krueger GK400RB IV Bass Head |
RatesPer Day£30.00 Per Week£120.00 |
|
The 400RB-IV Artist Series head produces an efficient 280 watts. This unit comes fully loaded with pro features: toroidal transformer, series 4-band active EQ, extra output devices, sophisticated SOA protection circuits, and a variable speed fan to keep things cool while operating at high output levels.
|
||
Hartke HA5500 500watt Bass Amplifier |
RatesPer Day£30.00 Per Week£120.00 |
|
|
||
Hartke HA4000 400watt Bass Amplifier |
RatesPer Day£25.00 Per Week£100.00 |
|
|
||
Hartke HA3500 350watt Bass Amplifier |
RatesPer Day£20.00 Per Week£80.00 |
|
This amp delivers 350 Watts Per Side at 4 Ohms and 240 Watts Per Side at 8 Ohms and features selectable Tube & Solid-State Preamps
|
||
SWR 750x Tube Bass Head |
RatesPer Day£45.00 Per Week£180.00 |
|
The ultimate multi-purpose SWR bass amp, with crushing volume, two killer effects and 750 watts of pure SWR tone.
|
![]() |
|
Trace Elliot GP7SM 250 Bass Head |
RatesPer Day£20.00 Per Week£80.00 |
|
250 Watt Bass head using Trace Elliots well known GP7 Preamp. Very poular soild-state amp with 7 band Graphic Eq, Pre shape and a useful Tuner output.
|
||
Warwick Pro Tube IV |
RatesPer Day£30.00 Per Week£120.00 |
|
Dual channel amp head, 400 watts RMS into 4 ohms, MOSFET, 19", 2U. Extremely low-noise input section with gain control. Channel 1: dual tube preamp with 3-way switches for low, mid and high boost/flat/cut; parametric tone filter sets frequency for mid boost/cut and high cut. Contour switch. Crunch control sets input gain for tube section. 2nd stage switch selects between tube preamp and all-tube amp sounds by switching the power tube on and off. Channel 2: solid-state with switches for low and high boost, 8-band graphic EQ. Switchable limiter. Master section with separate output level controls, overload LED. Separate master control. Phone jack and mute switch. Rear panel: groundlift switch, tuner out, stereo effects loop, line outs L/R (post master), footswitch channel select, DI outs L/R with pre/post switch. Speaker out: 1 XLR, 1 high current speaker connector compatible with Switchcraft HPC & similar connectors. Fan cooling (non-permanent). Protections: short-circuit, HF oscillation, overheating, DC.
|
||
If you don't see what you need, please ask, we can probably get it for you.
†Prices shown do not include delivery.



